Filter
Top Products
89
[Committing Changes]
Whenever you use the configuration program to change system settings, the changes are
initially placed in temporary storage called random access memory or RAM. Your changes are
made effective when you submit them, but can be lost if the device is reset or turned off.
You can commit changes to save them permanently to flash memory.
[Rebooting the Device]
To reboot the device from the Commit & Reboot page, select a reboot mode from the
drop-down menu, and then click Reboot.
You can select from the following reboot options:
Reboot is the default setting and reboots using the settings currently in memory,
including any changes you made and committed during the current session
Reboot from Default Configuration reboots the device to default settings
provided by your ISP or the manufacturer. Choosing this option erases any custom
settings.
Reboot from Backup Configuration reboots the device using the settings that
were in effect prior to the most recently committed settings.
Reboot from Last Configuration is the same as the reboot option described
above.
Reboot from Clean Configuration reboots the device with no configuration. This
option will disable access to the Configuration Manager, as no LAN interface will be
defined. This option is intended only for technicians who have a serial port
connection to the device and knowledge of its command line interface.
Reboot from Minimum Configuration reboots the device with only these settings:
-- An Ethernet interface is configured with IP address
192.168.1.1, mask 255.255.255.0
-- The user login is set to:
User Name: root
Password: root
5.8.3 Local Image Upgrade
Your ISP may from time to time notify you that a software upgrade is available. Upgrade
files may be provided to you in two ways:
z On a CD-ROM or other media. You can use Configuration Manager to upload the file
from the CD-ROM drive or your PC's hard drive (or shared network drive) to system flash.
Instructions for this method are provided below.
z On remote ISP server. You can use Configuration Manager to download the file and
load it to system flash. For instructions on this method.