Filter
Top Products
C841M-A (7/02) 3
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure, it is designed for indoor use
only and it must not be installed where exposed to rain and moisture.
3. Use only replacement parts recommended by Pelco.
DESCRIPTION
The VA6200 Series Sequential Switchers manually or automatically switch multiple cameras to a monitor. You can switch up to
20, 12, 8, or 4 cameras to 1 or 2 monitors, depending on the model you have.
The switcher’s second monitor output can be connected to a monitor and/or a Coaxitron
®
controller. The switchers have an
alarm input for each camera and camera ID, and an external trigger to control camera sequencing remotely.
MODELS
VA6204 Sequential switcher with 4 camera and 4 alarm inputs, and 2 monitor outputs, 120 VAC
VA6204-X Same as the VA6204 except 230 VAC
VA6208 Sequential switcher with 8 camera and 8 alarm inputs, and 2 monitor outputs, 120 VAC
VA6208-X Same as the VA6208 except 230 VAC
VA6212 Sequential switcher with 12 camera and 12 alarm inputs, and 2 monitor outputs, 120 VAC
VA6212-X Same as the VA6212 except 230 VAC
VA6220 Sequential switcher with 20 camera and 20 alarm inputs, and 2 monitor outputs, 120 VAC
VA6220-X Same as the VA6220 except 230 VAC