Filter
Top Products
Pelco Manual C523M-H (6/05) 41
SPECIFICATIONS
SWITCHING
Programmable Switching
Duration: User-defined between 1 and 99 seconds
Programmable
Number of Steps
per Sequence: 16
Maximum Number
of Sequences: 4
VIDEO INPUTS
Number of inputs: 16
Type: 75-ohm, unbalanced, terminating or looping; jumper-selectable
Level: 1 Vp-p
Connector Type: Panel-mount BNC
VIDEO OUTPUTS
Number: 4 (maximum)
Type: 75-ohm, unbalanced
Level: 1 Vp-p
Video Fail Detection
Type: Vertical sync detector
Action: Switch to back-up sync generator
Connector Type: Panel-mount BNC
VIDEO SPECIFICATIONS
Bandwidth: 17 MHz
Frequency Response: Flat to 8 MHz, ±1.0 dB to 15 MHz
Gain: Unity (±1 dB)
Differential Gain: 2% typical
Differential Phase: 0.2° typical
Tilt: 0.5% typical
Signal-to-Noise: -55 dB (peak-to-peak vs. RMS noise)
DC Output: Zero volts
Cross Talk: -50 dB typical at 3.58 MHz
CHARACTER GENERATOR
Display: White with black border
Program Menus: Raster background with white characters
KEYBOARD INTERFACE
Protocol: Keyboard
Number of Ports: 1
Number of Independent
Keyboards: 8
Data Rate: 9600 baud
Connector Type: RJ-45, 8-pin modular (female)
Cable Type (supplied): 6 feet (1.8 m), flat, unshielded (may be shielded)
ALARM INTERFACE INPUTS
Number of Inputs: 18
Connector Type: 12-pin screw terminal
Sensing: Programmable, N.O./N.C.