Pentair SunTouch Network Card User Manual


 
2
SunTouch Pool and Spa Control System Installation and User’s Guide
SunTouch Control Buttons
Liquid Crystal Display (LCD): The main system display consists of a 16 x 2 alphanumeric character
LCD with backlighting for easy viewing.
Pool and Spa status display: While SunTouch is in normal day-to-day operations, the main status
screen will toggle between the pool (or spa) set and current temperature, and the current air
temperature (if an air sensor is installed, see page 24 for details). The current system time is displayed
on the lower left side of the screen. The heating source (if enabled) is displayed on the lower right side
of the screen. To switch the pool circuit on and display the pool temperature, the pool circuit must be set
to “On” (see Circuit On/Off Menu (1/13) on page 13 for details). To activate the Spa, press the Up
arrow button to view the current Spa temperature. For more information about the spa Up arrow button,
see page 3.
MENU button: Use the MENU button to access the Main Menu items. There are 13
menu items to select from. Press the MENU button to view each of the 13 menu
items. The Main Menu items are displayed along with its menu number (1/13). Use
the Menu button to scroll through the 13 menu items. To exit a menu item at any point,
press the Left button to return to the main status screen. If no menu activity is
detected after five minutes, the main screen is displayed. All menu settings are
permanently saved and retained in the SunTouch control panel even after power is
removed from the control panel. For descriptions of the Main Menu items using
“Pool/Spa” mode see page 13.
SunTouch Control Panel
Use the SunTouch control panel buttons to program and control pool and spa operations. You can schedule
daily operations to run automatically using the SunTouch menu features, and manually adjust temperature
settings, switch lights on and off, and setup pool/spa equipment. The SunTouch LCD displays the current
temperature settings, current time and equipment status information.
MENU
Main Menu 1/13
Circuit On/Off
SunTouch Control Panel
(Pool/Spa mode - Shared Equipment System)
SPA 71°F / 91°F
11:51AM HEATER