Filter
Top Products
UltraPort Serial Adaptors User Guide
Installing under Windows 95 and 98
Page 27
Chapter 2 Installing drivers and host cards
7. The FIFO Settings page is now displayed as shown in the next picture
8. In the FIFO Settings page, select the configuration values you want and either click on the
OK button or, if the COM port belongs to a UltraPort SI card, then you can click on the
Protocol Settings tab to access the software switchable interface modes.
In
Caution
It is strongly recommended that you do not make changes to the
FIFO trigger levels or com port name unless you have a valid
reason to do so.
Selects the port
name for a given
device.
Allows you to select
the default port
name or change it to
any unused port
name.
Default display is
the currently
assigned port name.