Filter
Top Products
UltraPort Serial Adaptors User Guide
Installing under Windows 2000/XP/Server 2003/Vista/Server 2008
Page 34
Chapter 2 Installing drivers and host cards
General setup procedure for Windows 2000/XP/Server 2003/Vista/Server 2008
The general procedure for installing UltraPort, UltraPort SI, and UltraPort Express cards
under the Windows 2000, XP, Server 2003, Vista, or Server 2008 operating systems is as
follows:
1. Install any UltraPort and cards and cables or connector boxes you require into your
system. See
Installing host cards and cable accessories on page 94.
2. Install the UltraPort, UltraPort SI, or UltraPort EXPRESS device driver software. See
Installing device drivers and utilities onto your system on page 35.
3. If you add new UltraPort, UltraPort SI, and UltraPort Express cards, you should run
Update Driver to make sure the new cards have the latest driver. See
Adding additional
cards and/or updating drivers on page 37.
4. If required, remove any host cards you want from your system. See Removing host
cards on page 100.
5. Using the Windows Device Manager, configure the serial ports you have added to the
system. See
Configuring serial ports on page 38.