Filter
Top Products
Perle PoE/PoE+ Ethernet Media Converter
Installation Guide
25
Method 2:
The fiber connection can also be verified by configuring the remote
media converter for loopback mode. The LKF LEDs on both media
converters should be lit. Data should pass through the local
converter, over the fiber connection to the remote media
converter. At the remote media converter, the data will be looped
back and passed through the fiber, back to the local converter and
passed to the copper link.
No Power to the PD
1. Ensure that the PD is compatible with the S-1110P. If the PD
is a POE+ device, a POE+ media converter must be used. (S-
1110PP)
2. Ensure that the power supply being used, is the one provided
with the product
3. If the PD does not support Alternative A (including legacy
PD’s), the Power Option Jumpers must be set accordingly.
Also ensure the correct pin out for the device.
4. For proper detection of different classes of devices, the dip
switches must be set correctly.