Filter
Top Products
12
5 ADIM CONFIGURATION
The ADIM software is pre-loaded. No software installation is
required.
Open the ADIM Application by double clicking the
ADIM icon on your desktop.
5.1 Logging ON and User Levels
• Log in with a user name and password.
• If configuring the system, logon as a user with Installer or
Administrator privileges. This grants access to all areas.
NOTE: The ADIM’s user name and password are the same as
the Master Control Software for Windows.
• User levels for ADIM and Master Control Software for
Windows:
NOTE: The PC is pre-configured to automatically log into
Windows NT and start the ADIM application. ADIM can be
configured to automatically log in, bypassing the log in dialog.
This allows automatic start up of the ADIM application when the
PC is restarted.
1. Select or create an Allegiant Server document.
NOTE: ADIM will automatically open the last Allegiant
document, therefore this screen may not be seen.
2. If creating a new Allegiant document, select the type of
Allegiant:
3. The ADIM Status and Monitoring screen is displayed as
shown in Figure 5.1.
User Level
Default User
Names
Default
Passwords
Areas of Access
Installer Installer 1
Status, Monitoring
& Configuration
Administrator Administrator 2
Status, Monitoring
& Configuration
Operator Operator 3 Status, Monitoring
Figure 5.1