Philips ADM0101 Computer Hardware User Manual


 
23
APPENDIX C – RECOMMENDED NETWORK SWITCHES
Approved and tested network switches for use with ADIM.
3Com SuperStack 4300 model
APPENDIX D – LIST OF COMPATIBLE DVRS
Hi-Q Series (DVRRT4, DVRRT4EP)
APPENDIX E – PRIMARY, BACKUP, AND REVIEW DVRS
Primary:
DVRs on the input of the Allegiant
Backup:
DVRs used on the output of the Allegiant. When ADIM determines a problem with a Primary DVR, the cameras designated for that
Primary DVR are switched over to the Backup DVR for recording.
Review:
DVRs used on the output of the Allegiant. These DVRs are used to record all video from a switched output of the Allegiant. The
Review DVRs are useful when reviewing an incident/suspect that involved multiple cameras being switched to a specified Monitor. It
is also useful to review alarm / event video from the output of the Allegiant.
Using the Keyboard to Playback Video from the Review DVR:
1. Select the Monitor you wish to review
2. Select camera number that corresponds to the Hi-Q’s MON A output that is connected to the Allegiant Input. (In Figure
below this would be camera number 29)
ALLEGIANT Video Matrix
PHILIPS
4 1
23
10
11 12 13
MON A
Input
Monitor Outputs
29