Filter
Top Products
15
6.3 Status and Monitoring Page
Table Element Explained Field Values
Hi-Q number
Fixed field depending on where the Hi-Q
is entered into the table
1 - 800
Hi-Q Type
Determines configuration of the Hi-Q in the
system
Primary, Backup, Review Monitor
(See Appendix E for more details)
Hi-Q Status
Indicates operational status of a Hi-Q:
On-Line and operational (Green);
Off-Line (Red);
Back-up unit that is currently backing up
a primary Hi-Q (Yellow)
Primary:
On-Line (Green),
Off-Line (Red)
Backup:
Available (Green), Backing up a
Primary Hi-Q (Yellow)
Hi-Q Input Number Physical inputs on the Hi-Q. 1 through 4
Allegiant Logical Camera Number
If a Backup Hi-Q is Backing up a Primary Hi-Q, this
field indicates the logical camera numbers that are
being recorded by the backup Hi-Qs. For Primary
Hi-Qs, this is simply the logical camera attached to
the Hi-Q.
1- 9,999
Camera Status
Field is gray when the associated Hi-Q is
Off-Line, or if the Hi-Q is a Backup Hi-Q in the
Available state.
OK (green)
NO Sync (red)
BUTTON: Switch video from selected
Primary Hi-Q to a Backup Hi-Q
This can be used to perform maintenance or repair
on a Hi-Q without loosing any recording. To
manually switch cameras to backup Hi-Q, first
select a Hi-Q, then press this button.
BUTTON: Set Selected Backup Hi-Q
to “Available”
Frees up a Backup DVR that’s currently in use.
This DVR can subsequently be used to backup
another DVR. First, ensure that the primary Hi-Q
is operating and On-Line, then select the Backup
Hi-Q and press this button.
BUTTON: Silence Beep Silences the ADIM PC alarm (beep).
BUTTON: Add Manual Event Message
Allows a user to manually add a message to the
Event Log.
ADIM Messages
Displays the most recent information, warning,
and error events.
BUTTON: Open Log File
The Open File dialog box is displayed.
The log file names indicate the day.
(See Figures 6.1a & 6.1b)
Allegiant On-line
The lower right-hand corner of the screen
indicates On/Off-Line status of the Allegiant.
Green = On-Line
Red = Off-Line