Filter
Top Products
13
4. If it is a new document, or if the Allegiant system is not on-
line, select <Allegiant> <<Display Allegiant Document>>:
Allegiant Document:
5. Using the instructions in the Master Control Software For
Windows, configure the communication parameters
<<Transfer>> <<<Communication Setup>>>:
Set the communication parameters for the Allegiant and press
Go Online.
NOTE: The green Allegiant On-line (in the lower right corner)
indicates ADIM is properly communicating with the Allegiant. It
may take up to 20 seconds for communication to be established.
6. Go to the DVR Configuration page to enter the values for
each DVR. (See Section 6; Operation.)
6OPERATION
Elements of the ADIM document window:
6.1 DVR Configuration Page
• To edit any fields, first select the Edit button assigned to the
DVR #.
• After the row is filled in, select Accept.
Menu Bar
Tool Bar
Tabs