Filter
Top Products
16
Install the network connection
For the first time you connect the network, install
the network connection.
1 Set up a wired or wireless network.
2 Press to display the home menu.
3 Select [Setup] and press OK.
4 Select [Network], and press OK.
5 Select [Network Installation], and press OK.
6 Follow the on-screen instructions to complete
the network installation.
After the network installation completes, »
you can access the services: browse Net TV,
browse PC, BD-Live, software updates.
Tip
You can check the status of the wired or wireless •
connection of this player (see “Adjust settings” >
“Network Setup” > [View Network Settings] or [View
Wireless Settings]).
Use Philips EasyLink
This player supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
To enable the EasyLink feature, you must turn on the •
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
Tip
The wired network ensures the best performance for •
data transmission between the devices.
Set up a wireless network
Note
Ensure that this player and the router and the PC are all •
switched on.
Tip
The wireless performance can vary due to bandwidth •
connection, network traffic and some environmental
effects, such as surrounded by metal panel or heavy
concrete, radio interference and coverage distance.
EN