Filter
Top Products
5 / 58
1 Package and operating conditions
Starter Kit contents
The FMod-TCP BOX “Starter kit” should contain:
FMod-TCP BOX device
RS232 DSub cable
DIN 41651 40 lines cable
CD-Rom with dedicated software and Java applet sample
This manual
Absolute maximum rating
Damage may occur if the device is operated using values beyond those
mentioned below; device operation is not guaranteed.
Preliminary
Parameter Conditions Min Typ Max Unit
Supply voltage 0 24 33 V
Supply current No device connected to extension
connector.
60 100 mA
Supply current Device(s) connected to extension
connector.
3 A
Outputs 1, 2 current Relays. 1 A
Outputs 1, 2 voltage Max voltage to GND. 50 V
Outputs 3-14 current 0.5 A
Outputs 15, 16 current 1 A
Inputs voltage -15 28 V
+5V output current Pin 17 on extension connector. 0.4 A
Power output current Pin 40 on extension connector. 1 A
Operating temperature 0 70 °C
Storage temperature -40 120 °C
All external pins are protected against destruction by ESD (2kV).
The power supply input is protected against over and inverted voltage by a
33V Zener diode. The protection is guaranteed during 10ms within the
following current values:
For inverted voltage: 100A (the internal polifuse will cut the supply).
For over voltage: 3.25A max (the diode will be destroyed before the
fuse after 10ms!).
Damages to the device due to over or inverted voltage are not covered by
the warranty.
FMod-TCP User Manual v.2.8