Filter
Top Products
Completing the Installation and Configuration 3-19
■ To specify an IP address manually—Follow these steps to
install and configure TCP/IP manually:
a Select the Specify an IP address radio button.
b Enter the IP address, subnet mask address, and default
gateway address in their respective entry fields.
c Click OK.
You are prompted to restart Windows NT.
d Click OK.
TCP/IP is installed and configured.
Verify that all existing installed hardware devices are still working.
Typical devices to check include a sound card, CD-ROM drive,
analog modem, LPT port to a printer, and game ports. If any
devices are not working, go to Chapter
5 or the Windows
Troubleshooting Help system.