Filter
Top Products
4-2 CHAPTER 4: SOFTWARE INSTALLATION AND CONFIGURATION UNDER WINDOWS 3.X
Figure 4-1 Main Menu of the DOS Installation Program
5 Select Auto Install and Config for NetWare (AutoLink) and
press Enter.
The AutoLink program menu is displayed.
6 Select DOS, Windows 3.1x, or Windows for Workgroups 3.11
and follow the prompts.
7 When the auto installation process is finished, remove
EtherDisk diskette 2 from drive A and reboot the PC.
If you are running Windows 3.1x, after you connect to the
NetWare server, run the WSINSTALL program for full Windows
support. Contact your system administrator for the location of this
NetWare utility.
If problems occur only when using the AutoLink program, display
or print the AUTOLINK.LOG file to see a list of all events occurring
during the AutoLink installation and configuration process.
■ To display the file, Enter:
type autolink.log | more
■ To print the file, Enter:
print autolink.log
To install the network drivers for Windows 3.1x, Windows for
Workgroups, or DOS in a non-NetWare environment, see the
appropriate text files in the HELP directory on EtherDisk diskette 2.
ESC=Cancel F1=Help
EtherDisk for the EtherLink III Adapter Family v5.0
MAIN MENU
[ENTER]=Execute Function
[
↑↓
]=Scroll
[F1]=Help [ESC]=<Cancel>
Installation Overview (ReadMe) ...
Microsoft Windows Installation
Auto Install and Config for NetWare (Autolink)
Driver Installation and Update ...
Configuration and Diagnostic Program
Release Notes
This option displays a directory of help on relevant topics
(C) Copyright 1993, 3Com Corporation. All Rights Reserved.