Filter
Top Products
22
Using the Remote
Control Unit
Watching Television Watching a DVD
Using a Pioneer DVD
Recorder
Selecting the Audio
Mode
Watching a DVD
Use this menu to operate a connected DVD player.
1
Turn on the power to the digital sound projector.
2
Turn on the power to the television monitor.
3
Set television input to digital sound projector.
4
– ,
Select the input connected to the DVD player.
5
Change to DVD player operating menu.
6
The accompanying three menus are used to operate the DVD
player.
Use the arrows on the touch panel to change between the menu
screens.
1/3 2/3
Notes:
If a Pioneer DVD player is connected, the DVD player’s power will turn on in step
5
.
If is pressed in step
1
, the DVD player operating menus shown in step
6
will appear, and it will be
possible to operate the DVD player without using the digital sound projector.
DVD Player Operating Menus (3 screens)
“INPUT 1 – 5 connectors” P13
1/3 2/3 3/3
3/3