Filter
Top Products
30
Changing
Surround Sound
Adjusting the Tone
Calling Up a Room
Sound Setting
Video and Audio
Timing
Compensations
Adjusting
Surround Effects
Displaying the
Data Screen
Sub Woofer / Bass Management
This menu allows you to set the unit for a sub-woofer, and LFE channel ON/OFF.
1
-
3
(Same as steps
1
-
3
on P27, “Test Signal”)
4
Using the buttons, select “Bass Management”, and press the ENTER button.
The following screen appears:
Bass Management
1 Sub Woofer Yes
2 LFE Level 0.0dB
Notes:
LFE means “Low Frequency Effect”.
If “Sub Woofer” is set to “Yes”, use the buttons to select “LFE level”, then use the buttons to adjust
the output level.
Setting range: 0.0 dB – 12.0 dB
5
Using the buttons, select “Sub Woofer”, then press the ENTER button.
The following screen appears:
Sub Woofer Menu
1 No
2 No/LFE to panel
3 Yes
6
Using the buttons, select either “No,” “No/LFE to panel,” or “Yes,” then press the ENTER
button.
Note:
When you’re finished, you can press the MENU button repeatedly to return to previous screens.
LFE channel output level
Sub Woofer: No
(LFE will not be output from any channel)
Sub Woofer: No/LFE to panel
(LFE is output from digital sound projector)
Sub Woofer: Yes
(LFE is output to Sub Woofer)
“SUB WOOFER OUTPUT connectors” P13