Filter
Top Products
28
Changing
Surround Sound
Adjusting the Tone
Calling Up a Room
Sound Setting
Video and Audio
Timing
Compensations
Adjusting
Surround Effects
Displaying the
Data Screen
3
Using the buttons, select “Surround Setup”, and press the ENTER button.
The following screen appears:
Surround Setup
1 Left 0.0dB
2 Right 0.0dB
3 Surround L 0.0dB
4 Surround R 0.0dB
5 Center 0.0dB
6 Aux Center Mute
7 Bass Management
8 Noise Source off
Note:
“Aux Center” is an additional center channel. To use the “Aux Center” channel, a special dedicated setting is
required; consult your installation service personnel.
4
Using the buttons, select “Noise Source”, and press the ENTER button.
The following screen appears:
Noise Source
1 Off
2 Left
3 Right
4 Surround L
5 Surround R
6 Center
7 Aux Center
8 LFE
5
Using the buttons, select the channel, and press the ENTER button.
The test signal will be produced from the selected channel.
Front left channel
Front right channel
Rear left channel
Rear right channel
Center channel
“Sub Woofer / Bass Management” P30