Filter
Top Products
29
Adjusting the Sound
Changing
Surround Sound
Adjusting the Tone
Calling Up a Room
Sound Setting
Video and Audio
Timing
Compensations
Adjusting
Surround Effects
Displaying the
Data Screen
Changing Each Channel’s Output Level
1
-
3
(Same as steps
1
-
3
on P27, “Test Signal”)
The following screen appears:
Surround Setup
1 Left 0.0dB
2 Right 0.0dB
3 Surround L 0.0dB
4 Surround R 0.0dB
5 Center 0.0dB
6 Aux Center Mute
7 Bass Management
8 Noise Source off
4
Using the buttons, select the desired channel, then press the ENTER button.
The following screen appears:
Left
to edit
Press ENTER or MENU to exit
Level
0.0dB
5
Using the buttons, adjust the output level as desired, then press the ENTER button.
Adjust the output level while listening to the test signal.
Setting range: 0.0 dB – 12.0 dB
Note:
When you’re finished, you can press the MENU button repeatedly to return to previous screens.
Front left channel
Front right channel
Rear left channel
Rear right channel
Center channel