Filter
Top Products
5-3SV61027 Rev. D
Printer Maintenance • 5
• Clean the print head cartridge: dampen a soft cotton
cloth with water and wipe the nozzles clean (wipe in the
proper directions).
• Install a new ink cartridge (page 2-12).
Print Quality
Problems
(continued)
If the right and left exit rollers are misaligned, that is, contact
printed surfaces, they can become contaminated with ink.
Use water to dampen a soft cloth and remove the ink from
the rollers.
Exit Rollers
A film and/or dust can build up on the sensors and cause
misfeeds of the material. Lift the transport door and use
compressed air to blow dust from the sensors. Cans of
compressed air are available from many computer supply
houses.
Sensor
Print Head Shaft
Periodically wipe the print head shaft clean with a dry, soft,
lint free, cotton cloth. DO NOT OIL! Refer to illustration on
the next page.