Filter
Top Products
Defining Line Fields –––––––––––––––––––––––––––––––––––––––––
Example L,S,110,30,110,150,10,"" p
Syntax L,type,row,column,angle/end row,length/end col,
thickness,"pattern" p
L1. L
Indicates a line field. Enter L.
L2. type
Type of line. Only vertical and horizontal lines are
supported. Options:
S Segment. You choose the starting point and
ending point.
V Vector. You choose the starting point, angle,
and length.
L3. row
Distance from bottom of print area to line origin. Measure
in 1/100 in., 1/10 mm, or dots. Ranges:
English 0 - 599
Metric 0 - 1521
Dots 0 - 1150
L4. column
Distance from left edge of the print area to line origin.
Measure in 1/100 in., 1/10 mm, or dots. Ranges:
English 0 - 399
Metric 0 - 1014
Dots 0 - 767
L5. angle/
end row
If Using
Segments
Row location of end point. Measure from bottom of print
area. Ranges same as above. On horizontal lines, this
value must match item L3.
If Using
Vectors
Angle of line. Options: 0, 90, 180, or 270.
J640 Programmer’s Manual
7-12