Filter
Top Products
Error
Code
Description
265 Monetary decimal places are outside the range
0 to 3.
266 Character string length is invalid.
Must be 5 or 7.
267 Baud rate selection is invalid. Must be 0, 1, 2, 3, or
4. Refer to Chapter 5, "Configuring the Printer," for
more information.
268 Word length selection is invalid. Must be 0, or 1.
Refer to Chapter 5, "Configuring the Printer," for more
information.
269 Stop bits selection is invalid. Must be 0, or 1. Refer
to Chapter 5, "Configuring the Printer," for more
information.
270 Parity selection is invalid. Must be 0, or 1. Refer to
Chapter 5, "Configuring the Printer," for more
information.
271 Flow control selection is invalid. Must be 0, 1, 2 or 3.
Refer to Chapter 5, "Configuring the Printer," for more
information.
272 Internal code page selection is invalid. Valid options:
0 Internal
1 ANSI
2 DOS (Domestic)
3 DOS (Multilingual)
273 Cut adjustment is outside the range -99 to 99.
282 RS232 Trailer string is too long. Use a maximum of 3
characters.
283 ENQ Trailer string is too long. Use a maximum of 3
characters.
J640 Programmer’s Manual
11-10