Filter
Top Products
Installation
30 Planar PD8130/PD8150 Installation/Operation Manual
PREL
I
MINA
R
Y
3.8
Adjusting the Picture
Orientation
If the PD8130/PD8150 is installed behind the screen, you must change the
picture orientation to match the installation method. To do this, press MENU on
the remote control. Then, select
System from the Main Menu.
Rear Projection If the projector is used in a rear-projection application (see Figure 3-6), press
repeatedly to select Rear Projection from the System Menu. Press or to set it
to On.
Ceiling Mode If the projector is ceiling-mounted, the PD8130/PD8150 automatically inverts the
image. If this automatic inversion is not desired, select
Ceiling Mode from the
System Menu and set it to Off.
3.9
Lens Adjustments
The PD8130/PD8150 gives you a great deal of control over the picture size,
position and focus.
Focus To focus the projected image, grasp the
lens by the front ring and rotate it.
Zoom To make the picture smaller (zoom out)
or larger (zoom in), rotate the zoom ring
in the appropriate direction.
Lens Shift To access the lens shift controls:
1. Locate the Planar badge at the top
of the projector. Press on the side of
the badge nearest the “P” to release
it.
➤
➤
➤
➤
Zoom In
Zoom Out
➤