Filter
Top Products
Operation
Planar PD8130/PD8150 Installation/Operation Manual 33
PREL
I
MINA
R
Y
4.1
Selecting Video Memory
Press M1, M2 or M3 to recall settings from a memory preset. Then, press ENTER to
confirm your selection. Or, to cancel the operation, press
to select Cancel
and press ENTER.
You can assign each of these three buttons to any
of four memory presets. For more information, refer
to
M1 Key / M2 Key / M3 Key on page 57.
4.2
Selecting an Aspect
Ratio
Press the aspect ratio ( ) button to select the appropriate aspect ratio for the
type of program material being viewed.
4.3
Selecting An Input
Source
When you turn on the PD8130/PD8150, it switches
to the last selected input and looks for a valid
signal.
Use these buttons on the remote control to select
an input source directly. You can assign each of
these five buttons to any input. The default
assignments are: 1 = HDMI 1, 2 = HDMI 2,
3
= Component 1, 4 = S-Video, 5 = Video.
For more information, refer to 1 Key / 2 Key / 3 Key / 4 Key / 5 Key on page 57.
4. Operation
M1 M2 M3
SHARP
USER MEMORY
1
4
2 3
5
▲
SOURCE