Filter
Top Products
DLP
®
Projector – User’s Manual
Video/Audio Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the
Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu.
Press
◄► to change values for settings.
Item Description
Video AGC
Press the cursor ◄► button to enable or disable automatic gain control for the
video source. (Range: On – Off)
Video
Saturation
Press the cursor ◄► button to adjust the video saturation. (Range: 0 – 100)
Video Tint Press the cursor ◄► button to adjust the video tint/hue. (Range: 0 – 100)
Film Mode
Press the cursor ◄► button select different film mode.
• Off – Film mode is turned off.
• Auto Automatic 2:2/3:2 pull-down detection.·
o 2:2 Uses 2:2 pull-down correction methods.·
o 3:2 Uses 3:2 pull-down correction methods.
Video
Overscan
Press the cursor ◄► button to enable or disable video over scan. (Range: On – Off)
Audio Press Enter / ► to enter the Audio menu. See “Audio” on page 28.
Reset Resets all Video/Audio settings to default values
– 27 –