Filter
Top Products
DLP
®
Projector – User’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
Press the Menu button to open
the Image menu.
2.
Press the cursor ◄► button
to
move to the Installation II menu.
Press the cursor ▲▼ button to
move down to Advanced.
3.
Press the cursor ▼▲ button
to
move down to Lamp Hour Reset.
4.
Press the cursor ► or Enter
button.
A message screen appears.
5.
Press the cursor buttons in this
order: ▼▲◄►.
The Lamp Hours reset to zero.
– 38 –