Filter
Top Products
Input Setup
Planar UltraRes User Manual 11
Input Setup
You can set up your Planar UltraRes display using multiple or single inputs. Both are
explained below. You can select multiple or single input mode using the remote
control, the UltraRes Control tool or by using RS232 commands. For more
information see "Setting Up UltraRes Using Multiple Inputs" on page 32 and "Setting
Up UltraRes Using Single Inputs" on page 35.
Supported Formats for Multiple Inputs
The following formats are supported for multiple inputs:
• (4x) DisplayPort or HDMI/DVI 1080p @ 24/50/60Hz
• PC with DisplayPort or HDMI/DVI (or mix of both)
• External video processors
• (4x) DisplayPort or HDMI/DVI 960 x 2160 @ 60Hz
• Needs a PC with a special graphics card set up
Supported Formats for Single Inputs
The following formats are supported for single inputs:
• (1x) DisplayPort or HDMI 4K @ 24/25/30Hz
• PC with DisplayPort 1.1a or 1.2 output
• 4K Blu-ray player
RS232 connector
Used to connect to the
Remote Monitoring software.
Used to send serial commands to the
display. Also used for diagnostic purposes.
Used to receive signals from
the remote control.