Filter
Top Products
Supported UltraRes RS232 Commands
Planar UltraRes User Manual 77
Supported UltraRes RS232 Commands
The following section lists the commands that are currently support on the UltraRes
display.
Setting
Command
Code
Read/
Write
Min
Value
Max
Value
String? Notes
Auto Power Off Enable APE R/W 0 1 No 0 = Off
1 = On
Auto Power Off Timer APT R/W 1 60 No Value is in minutes
Backlight BKL R/W 1 15 No
Blank Screen Blue BSB R/W 0 255 No
Blank Screen Green BSG R/W 0 255 No
Blank Screen Red BSR R/W 0 255 No
Color Space CLS R/W 0 4 No 0 = REC601
1 = REC709
2 = RGB
3 = RGB Video
4 = Auto
EDID Type EDT R/W 0 1 No 0 = 4K Preferred EDID
1 = 1080p Preferred EDID
Error Code ERR R 0 TBD No 0 = None
1 = AC Power Supply 1 Failure
2 = AC Power Supply 2 Failure
3 = AC Power Supplies 1 and 2 Failure
4 = AC Power Supply 3 Failure
5 = AC Power Supplies 1 and 3 Failure
6 = AC Power Supplies 2 and 3 Failure
7 = AC Power Supplies 1, 2 and 3 Failure
8 = AC Power Status Cable Disconnected
9 = DC Power Supply Failure
10 = FPGA Initialization Failure
11 = Calibration EEPROM Failure
12 = Overtemp
Error Log 1 EL1 R N/A N/A Yes Response contains 50 hex digits
representing the first 25 entries in the
error log
Error Log 2 EL2 R N/A N/A Yes Response contains 50 hex digits
representing the second 25 entries in the
error log
Firmware Upgrade FWU W N/A N/A No Action will be performed on any setting
value
Information Boot
Version
IBV R N/A N/A Yes
Information Current
Color Space
ICC R 0 3 No 0 = REC601
1 = REC709
2 = RGB
3 = RGB Video