Filter
Top Products
Remote Monitoring Network Setup
68 Planar UltraRes User Manual
Remote Monitoring Software Setup (Upgrading Network Firmware)
This page allows you to upload the latest UltraRes Remote Monitoring software. You
can also reset all of your settings to the factory defaults, as well as choose the web
page link that is associated with the Planar logo in the top right corner of the page.
1 Click Choose File to locate the latest UltraRes software that you downloaded
from Planar’s website.
Note: Make sure the software is downloaded to a local drive.
2
Click Load Software to load the new software. This process can take a few
minutes, depending on the speed of your network. It is very important that you
do not interrupt the load process once it begins!
3 If you want to reset ALL settings to the factory default, click Reset ALL to Factory
Default. This includes network settings, date and time, etc., as well as display
settings.
Caution: Using this option will reset all of your configurations and reboot the remote
monitor. Because this includes network settings, be aware that the UltraRes Remote
Monitoring software may not configure to the same network address after the system
reboots.