Filter
Top Products
40
Figure 4-35 System Information Screen
",/%
This function allows modifying the IP address, subnet mask and default gateway. The screen in figure 4-36
appears.
Note:
The default IP address is 192.168.0.100
Figure 4-36 IP Configuration Screen
After setup is completed. Press "Apply" button for save the current configuration. The screen in figure 4-37
appears with message “Operation completed successfully!”
Figure 4-37 IP Configuration save successfully Screen
Press “Back” for back to previous web screen.
"0%
This function provides the Power over Ethernet configuration of the Switch. The available options are shown as
below:
POE Ports
Allow user to Enable/Disable POE function and set port power feeding priority. Please refer to section 4.11.1.