1
1. INTRODUCTION
1.1 Package Contents
Check the contents of your package for following parts:
Web Smart Gigabit Ethernet Switch x1
CD-ROM user's manual x1
Quick installation guide x1
19” rack mounting kit x1
Power cord x1
Rubber feet x 4
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the carton including the
original packing material, and use them against to repack the product in case there is a need to return it to us for repair.
1.2 How to Use This Manual
This 48-10/100Mbps+4G Ethernet Web Smart Switch User Manual is structured as follows:
Section 2, Installation
It explains the functions of FGSW-4840S and how to physically install the FGSW-4840S.
Section 3, Configuration
It contains information about the Smart function of FGSW-4840S.
Section 4, Switch operation
It contains specifications of FGSW-4840S.
Section 5, Troubleshooting
It contains troubleshooting guide of FGSW-4840S.
Appendix A
It contains cable information of FGSW-4840S.
In the following section, the term “Switch” means the FGSW-4840S; term of “switch” can be any third part switches.
1.3 Product Features
Complies with IEEE802.3, 10Base-T, IEEE802.3u, 100Base-TX and IEEE802.3ab, 1000Base-T
48-port 10/100Mbps Ethernet ports
2 10/100/1000Mbps ports and 2-SFP mini-GBIC interfaces
Features Store-and-Forward mode with wire-speed filtering and forwarding rates
Hardware based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation
IEEE802.3x flow control for full duplex operation and backpressure for half duplex operation
Integrated address look-up engine, support 4K absolute MAC addresses
Remote Web management interface
System log, view trap, firmware upgrade, IP setting through the Web Switch utility
Port-based VLAN, Trunk, QoS support
Supports backup and restore current configuration
Trap function for Switch events
Automatic address learning and address aging
Supports Auto-MDI/MDI-X function