Planet Technology FPS-2PUWG Printer User Manual


 
Page 19
6. Accept the default Program Folder. Click Next. The Setup windows will appear
as the files are copied to your computer.
7. The installation will be stopped in 95% for a few seconds and a screen like the
following will be displayed.
Click Browse. The Configure screen will search all the Print Server in your
LAN.
Select the Print Server you want to use in the Print Server list.
Note: You can find the print servers default name in the back panel as SCxxxxxx. It
also represents the print servers MAC address. For example, SC123456 shows its
MAC address: 00-c0-02-12-34-56.
If you are using 3 ports Print Server, you can click Select Device Port to se-
lect the port which your printer connect to.
Press OK to finish the installation.
Note: If the Configure PrintServer screen is not displayed, Press Alt + Tab to
show it.
Figure 2: Printer Port Setup (Peer-to-peer Print Driver)