Planet Technology FPS-2PUWG Printer User Manual


 
Page 59
Remote Printer
E-mail Address
The E-Mail address for the Internet printer. Your
print jobs will be sent to this E-Mail address.
Mail Server Name
or IP Address
This is the name or IP Address of your Mail Server.
If you are on a LAN, ask the LAN Administrator. If
using a dial-up connection, use the data provided
by your ISP.
Your Internet
E-mail Address
The normal address that people use to send you
E-mail.
Retry Interval
(Seconds)
If unable to connect to the E-Mail server, retry after
this time period (1 to 255 seconds, 30 is usually
OK).
Reply Notification
Mail
Check to receive an E-Mail when your print job has
been processed.
5. On completion, a new printer port will have been created.
Using the new Port
The Windows Control Panel is used to connect the correct printer to the InterNet Print-
ing Port. In Windows 95/NT, the procedure is:
1. Select the Printer which matches the remote printer, then choose Properties, as
shown in the example below.
Figure 22 InterNet Printer Properties
2. Select the new port - WAN (InterNet Printer) in the example - as the port for this
printer.
If you do not have the correct printer driver, or you wish to create another
printer using an existing driver, use the Windows Add Printer facility.
Using the Windows Port Settings or Configure Port facility will reveal the same
Configure Port screen shown in Figure 21 InterNet Printer Port on page 58.
If you wish to print to multiple Internet Printers, use the Windows Add Port fa-
cility to add a new InterNet Printer port. Ensure that the correct data is entered
in each port, and that each port has a unique name.