Filter
Top Products
PLANET Technology Corp. GRT-101/401 User’s Manual
- -
30
3.4 Command Line Interface
For serial console and Telnet management, GRT-101/GRT-401 implements
two operational interfaces: command line interface (CLI) and menu driven
interface. The CLI mode provides users a simple interface, which is better for
working with script file. The menu driven interface is a user-friendly interface to
general operations. The command syntax for CLI is the same as that of the
menu driven interface. The only difference is that the menu driven interface
shows you all of available commands for you to select. You don’t need to
remember the command syntax and save your time on typing the whole
command line.
The following figure gives you an example of the menu driven interface. In the
menu, you scroll up/down by pressing key I / K, select one command by key L,
and go back to a higher level of menu by key J. For example, to show the
system information, just logon to GRT-101/GRT-401, move down the cursor by
pressing key K twice and select “show” command by key L, you shall see a
submenu and select “system” command in this submenu, then the system will
show you the general information.
In this chapter, all configuration procedures are explained by command line
examples with necessary parameters. When operating in the menu driven
interface, just select the corresponding command items from the menu
hierarchy to configure the same setting.