Filter
Top Products
PLANET Technology Corp. GRT-101/401 User’s Manual
- -
31
Note: GRT-101/GRT-401 invokes menu driven interface when first time logon with default user profile “admin”. Both
interfaces have on-line help information. To get on-line help, type “?” for CLI mode or press CTRL+Q for menu driven
interface.
3.4.1 Multi-level password protection
When you login via serial console or Telnet, GRT-101/GRT-401 defaults to a
program execution (read-only) privileges to you. To change the configuration
and write changes to nonvolatile RAM (NVRAM), you must work in enable
mode. Follow the steps below to invoke the enable mode:
admin> enable
Supervisor password: ****
Note: The supervisor password is the same as that for web management interface. If you have not change password
setting for the web interface of GRT-101/GRT-401, enter “root” to enter GRT-101/GRT-401. For more security issues
for remote management interfaces such as Telnet and web interface, see section 3.15 Management Security.
You are now in enable mode. The system prompt appears:
admin#
Follow the steps below to change the user interface:
To select menu driven interface for user profile 1 (default user profile), enter:
admin# admin user modify 1 attrib menu