Filter
Top Products
- 4 -
Gigabit ports
QoS Scheduling
Supports delay bound, strict priority, WFQ (Weighted Fair
Queuing) and best effort service disciplines
Congestion Avoidance
Supports WRED (Weighted Random Early Detection) drop
threshold management
Rate Control
10 levels of rate (10 to 100%)
configurable on 10/100Mbps
port
-
Standards Conformance
Regulation Compliance
FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet),
IEEE 802.3z (1000Base-SX/LX),
IEEE 802.3ab(1000Base-T),
IEEE 802.1D (STP),
IEEE 802.3x (full-duplex flow control),
IEEE 802.1p (QoS),
IEEE 802.1Q (VLANs)
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 826 ARP
RFC 854 Telnet
RFC 1058 RIP
RFC 1122 Host Requirements
RFC 1157 SNMP v1/v2
RFC 1256 ICMP Router Discover Protocol
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1757 RMON 4 groups, statistics, history, alarms and events
RFC 1812 IP Router Requirement
RFC 2131 DHCP Relay
RFC 2068 HTTP
RFC 2236 IGMPv2
RFC 2674 VLAN MIB
1.4 How to Use this Manual
This user’s manual is structured as follows:
Chapter 2, Installation explains the hardware functions of the Switch and how to physically install
it.
Chapter 3, Configuration explains how to set up and modify the configuration of the Switch.
Chapter 4, Menu-Driven Console Management and Chapter 5 Performing Advanced
Management Activities explains how to configure either locally through its RS-232 port or
remotely via a Telnet session.
Chapter 6 Web-Based Configuration and Chapter 7 Performing Advanced Setup Activities allows
you to access the Switch using the Web browser of your choice.