Filter
Top Products
- 186 -
Profile.
F
IGURE
5-172
Note: Fixed Drop Priority and Fixed Transmit Priority are read-only parameters that cannot be
changed.
4. Press the Esc key until you return to the desired screen.
5.15.2.7 Selecting Rate Control Parameters
Rate control function allows you to specify the outbound packets number. The percentage is based
on 100Mbps full speed. Only 10/100Mbps ports support rate control function. To specify rate control
parameters:
1. From the QoS screen, use the Down Arrow key to highlight Rate Control, and then press the Enter
key. The Rate Control screen appears.