Filter
Top Products
42
Click <Save> at the bottom of the screen to save the above configurations and press “Apply and
Reboot” to apply the configuration and reboot the XRT-D router. You can now configure other
advance sections or start using the router (with the advance settings in place).
3.4.5 Protocol and Port Binding
Protocol and Port Binding let you manually bind an application to a WAN port. Only packets that
match all the entered criteria will be bound to the assigned WAN port. You can have to fill all the
items. The items that you leave blank will be ignored.
Parameters Description
Enable Protocol & Port Binding The “Protocol and Port Binding” function is disabled by
default. You can select to enable the “Protocol and Port
Binding” function.
Source IP Range Only packets with this assigned source IP range will
statically bind to the assigned WAN port. If you assign
192.168.0.3 – 192.168.0.5, it means 3 IP addresses:
192.168.0.3, 192.168.0.4 and 192.168.0.5.
Destination IP Range Only packets with this assigned destination IP range will
statically bind to the assigned WAN port. If you assign
192.168.02.3 – 192.168.0.5, it means 3 IP addresses:
192.168.0.3, 192.168.0.4 and 192.168.0.5.
Source Port Range Only packets with this assigned destination IP range will
statically bind to the assigned WAN port.