Filter
Top Products
45
Click on one of the firewall selections and proceed to the manual’s relevant sub-section
3.5.1 Access Control
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.), then this is the place to set that configuration. Access Control allows
users to define the traffic type permitted in your LAN. You can control which PC client can have
access to these services.
Parameters Description
Filter client PCs by IP Fill “IP Filtering Table” to filter PC clients by IP.
Add PC You can click Add PC to add an access control rule for
users by IP addresses.
Remove PC If you want to remove some PC from the "IP Filtering
Table", select the PC you want to remove in the table
and then click "Delete Selected". If you want remove all
PCs from the table, just click "Delete All" button.
Filter client PC by MAC address Check “Enable MAC Filtering” to enable MAC Filtering.
Add PC Fill in “Client PC MAC Address” and “Comment” of the
PC that is allowed to access the Internet, and then click
“Add”. If you find any typo before adding it and want to
retype again, just click "Reset" and the fields will be
cleared.
Remove PC If you want to remove some PC from the "MAC Filtering
Table", select the PC you want to remove in the table