Filter
Top Products
32
Scan from the Scanner Buttons
1. Place the document or images onto the scanner. (Refer to “Chapter II.
Scanning” of the Scanner User’s Guide for more information in placing paper
into the ADF properly.)
2. Check current button settings by viewing the memo label or the Button
Configuration window. If needed, you may also modify settings to meet your
current needs. (Refer to “View Button Settings” and “Configure Button Settings”
below for more information.)
3. Press the UP or DOWN button to select the desired task.
4. Press the Scan button.
The scanner starts to scan immediately and carry out the corresponding action
according to settings you have set up in the Button Configuration window.
Attention
Place only text documents for OCR purposes. Do
not scan a photo using the OCR button.
Configure Button Settings
Within the “Button Configuration” window, you can find a row of icons running
through the left side of the window. Each icon represents a scanning task, and the
number underneath corresponds to the function number displayed on the scanner front
panel. Nine frequently-used scanning tasks are pre-configured for your convenience to
start scanning immediately. You may, however, customize the settings of every nine
tasks to best meet your needs and preferences. Follow the steps described below:
1. Do one of the following to open the Button Configuration window:
Double-click the icon in the Windows system tray.
Right-click the icon in the Windows system tray, and then choose
Button Configuration… in the pop-up menu that opens.
2. Select a task number by clicking on the icon.
3. Select the desired function from the drop-down list of Button Template and
adjust button settings.
Information
It’s optional for you to write down the customized
button number settings on the included memo
label and place this memo anywhere on the
scanner.
Click the Help button within the Button Configuration window for more information
about the settings.