Filter
Top Products
Loading the Film Pack
User’s Guide
P–500
5
2
Slide the film pack carefully, film-side up,
within the metal guides as shown.
3
Close the film compartment door.
4
Press and hold . The film cover ejects.
Each time the film door opens, the film
count resets to 10. If you insert a par-
tially used film pack, the count will be
inaccurate.
You should have enough battery power to print a
full film pack. When the power level shows only
the two smallest bars you have a limited time
to print your images.
To conserve battery life, the printer shuts down
after several seconds of inactivity. To reactivate
the printer press and hold . The printer
retains your selections.
P500_UG_Final.fm Page 5 Wednesday, October 18, 2000 4:21 PM