Filter
Top Products
16
2 • 3 Loading Cards
To help you load, print, and collect cards, the P50i has the following items:
A - CARD FEEDER
This item is used for loading cards, it can hold up to 50 cards of 30 mils.
You may have to install the Card Feeder.
Hold the card feeder on the sides and slide it into the rail guide.
• Install Cards into feeder at the front of your P50i printer.
For Cards with magnetic stripe refer to Appendix A for loading instructions.
DO NOT bend cards or touch print surfaces as this can reduce print quality.
The surface of the cards must remain clean and dust free. Always store cards in an
enclosed container. Ideally, use cards as soon as possible. If cards stick together,
carefully shuffle them.
* See Chapter 6, Technical Specifications, for card requirements and capacities.