Filter
Top Products
38
A • MEDIA LOADING ORIENTATION
The magnetic encoder is a factory installed item with the read/write head positioned
below the card path, available with HICO encoding or LOCO encoding.
When loading cards into the Card Cartridge, please ensure that the magnetic stripe is
facing down and closest to the right when facing the card feeder.
Note:
M1 = Stripe Down HICO
M2 = Stripe Down LOCO
approved HICO & LOCO PVC cards are available. (See Appendix C).
ONLY USE cards that comply with ISO 7810 & 7811 standards for magnetic stripe
cards. The magnetic stripe must be flush to the surface of the card to work properly.
Never use cards which have taped-on magnetic stripes.