Filter
Top Products
27
4 • 2 Cleaning the Print Head
A cleaning using the cleaning system with cards usually suffices. However, a separate Print head cleaning using swabs
can remove more stubborn deposits when print anomalies persist. To avoid deposits, only use foam-tipped swabs.
1 • Switch power Off, open cover by pressing both cover release buttons and remove the Ribbon Cartridge.
2 • Clean Print Head by moving alcohol-moistened swab tip side-to-side across Print Head elements. Only use
moderate force.
Make sure the elements are dry before switching on.
(To reorder swabs see Appendix C).
Never use a sharp object to scrape deposits from the print head. Permanent
damage will result.