Filter
Top Products
Using the Polycom Touch Control
2–8
Ending a Call
To end a call:
1 From the Call screen, touch Hang Up.
You will receive a message that the call has ended.
2 Touch OK.
Adjusting the Volume
This section describes how to adjust the sound you hear at your site, how to
change the volume on the Polycom Touch Control, and how to mute the
microphones.
Adjusting the Volume at Your Site
Raising or lowering the volume affects only the sound you hear at your site.
To adjust the volume:
1 From the Home screen, touch Audio.
2 Use the Volume slider to increase or decrease the call volume.
When you are in a call, volume control is available on the Call screen and
in the top right corner of other screens.
Adjusting the Polycom Touch Control Volume
You can adjust the volume levels of the Polycom Touch Control ring tone and
user alert tones.
To adjust the Polycom Touch Control volume:
1 From the Home screen, touch User Settings.
2 Use the Volume slider to adjust the Polycom Touch Control volume.
With audio calls, if the person on the telephone hangs up first, you still need to end
the call by touching Hang Up, just as you would hang up a telephone receiver in a
regular phone call.