Filter
Top Products
MGC+50/MGC+100 Getting Started Guide
2-5
3. Release the clasp locks at the bottom, and lift the MGC+100 top cover.
Figure 2-2: Unpacking the MGC+100
4. Lift the MGC+100 unit and remove the packaging material.
5. Lower the MGC+100 unit, placing it on the surface.
If the MGC+100 is a standalone unit, place it on a flat surface. If you are
rack mounting the MGC+100, allow a minimum clearance of 3” above
the unit.
Foam Block
Foam Block
Wood Packing
C
ase