Filter
Top Products
Chapter 3 - MGC+ Software Installation and Configuration
3-13
Prefix Enter a number to be used by H.323 participants to dial
to the MCU as part of the dial-in string.
Enter
789 to use the default Entry Queues and Meeting
Rooms shipped with the MGC+ unit without modifying
their properties.
When PathNavigator is used, this prefix automatically
registers with the gatekeeper. When another
gatekeeper is used, this prefix must also be defined in
the gatekeeper.
SIP Select this check box to indicate that SIP participants
can connect to the MCU using this service. Then select:
• Specify - to manually define the SIP server.
• Auto - to automatically detect the SIP server’s IP
address if a DHCP or if a DNS Server is defined.
SIP Server IP
Address or
Name
If SIP-Specify is selected, and a DHCP is not used,
enter either the IP address of the preferred SIP server
or its host name (if a DNS server is used).
Domain Name
or IP Address
Conferences and Entry Queues can be registered in the
proxy in the format user@host. for example,
EQ1@polycom.com, where EQ1is the user part and
polycom.com is the host part.
When dialing to a conference or Entry Queue, the SIP
server expects to receive the host either as domain
name or as an IP address.
The domain name is used for identifying the SIP server
in the appropriate domain according to the host part in
the dialed string. For example, when the call to
EQ1@polycom.com reaches the outbound proxy, this
proxy looks for the SIP server in the polycom.com
domain to which it will forward the call.
When this call arrives at the SIP server in polycom.com,
the server looks for the registered user (EQ1) and
forwards the call to this Entry Queue or conference.
Table 3-1: IP Configuration Parameters (Continued)
Field Description