Filter
Top Products
MGC+50/MGC+100 Getting Started Guide
3-12
Default Router Enter the IP address of the default router. If a DHCP is
used, the IP address of the default router is
automatically retrieved from the DHCP server and
cannot be modified.
DNS Select this check box to indicate that a DNS server is
used in the network. Then select:
• Specify - Select this option to enter the IP address
of the DNS server.
• Auto - select this option to automatically detect the
primary DNS IP address, provided the DNS Server
is defined in the DHCP and if the DHCP -obtain IP
Address automatically check box was selected.
DNS Server IP
Address
If Specify was selected, enter the IP address of the
primary DNS server to be used.
Local Domain
Name
Enter the domain name where the MCU is installed.
The name of the domain includes the host part of URL
or URI (the part of the host’s address that appears after
the at sign (@), or in a URL the part following the www.
prefix), for example, polycom.com.
This field is used both for SIP proxy registration
purposes and DNS resolution and therefore it is
required if you are using DNS servers in this service.
H.323 Select this option to allow H.323 participants to connect
to the MCU using this service.
Gatekeeper If a gatekeeper is used, select the Gatekeeper check
box to define its properties.
Gatekeeper IP
Address or
Name
Enter either the gatekeeper’s host name (if the DNS
server is used), or IP address.
Table 3-1: IP Configuration Parameters (Continued)
Field Description