Getting Started Guide
1 - 4
Setting up the System
You must configure the RAS200A before it can be deployed and accessed
remotely from a web browser within your network. There are two ways to
configure an RAS200A:
• Connect a monitor, keyboard and mouse to the unit and configure it
locally
• Configure the unit from a different PC on the network via a web
connection
Both connection methods are described here.
To configure an RAS200A locally:
1. Connect a monitor, keyboard and mouse to the RAS200A unit and turn it
on.
2. Login to operating system using the user name “Administrator” and the
password “polycom.”
3. Using an Internet Explorer browser, login to the RAS200A and complete
the first time setup. See Logging In the First Time on page 2-1.
4. If you have already connected RAS200A to the target IP network restart
it; otherwise, turn the RAS200A off, connect it to the target IP network
and then power it back up.
Item Description Function
1 Power Power connection
2 PS/2 ports Mouse (green) ; Keyboard (purple)
3 USB 0 and 1 ports Universal serial bus ports
4 COM1 port RS-232 port
5 Parallel port Printer cable port
6 Monitor VGA monitor port
7 LAN1 Ethernet port for network connection
8 LAN2 Disabled