Polycom RAS200A Server User Manual


 
Getting Started Guide
1 - 2
Power cord (already included)
Client computer, with a keyboard, monitor, and mouse
Ensuring System Safety
To ensure system safety, follow these guidelines:
Keep the area around the Polycom RAS200A system clean and
uncluttered.
The system weighs about 23 lbs (10.5 kg). To lift the system, two people
(stationed one at each end) should lift slowly, with their feet spread apart
to distribute the weight evenly. Always keep your back straight and lift
with your legs.
Electrical Safety Precautions
To ensure electrical safety, follow these guidelines:
Note the locations of the power on-off switch on the chassis and the room's
emergency power-off switch, disconnection switch, or electrical outlet. If
an electrical accident occurs, you can then shut off power quickly.
Do not work alone when handling high-voltage components.
Do not use mats designed to decrease static electrical discharge for
protection from electrical shock. Use rubber mats that have been designed
specifically as electrical insulators instead.
The power supply power cords must include a grounding plug and be
plugged into grounded electrical outlets.
Rack-Mount Safety Precautions
To ensure rack-mount safety, follow these guidelines:
Determine a suitable location for the equipment rack that holds the
system. The location should be a clean, dust-free, well-ventilated area that
is near a grounded power outlet. Avoid areas where heat, electrical noise,
and electromagnetic fields are generated.
Ensure that the leveling jacks on the bottom of the rack are fully extended
to the floor, so that the full weight of the rack is resting on them.
In a single-rack installation, make sure stabilizers have been attached to
the rack.